Description
QP2425 Charger – 24 Volt 25 Amp with Anderson SB120 Connector
The QP2425 is a heavy-duty 24V / 25A portable battery charger commonly selected for industrial and facility equipment that runs on a 24-volt battery system. This listing is configured with an Anderson SB120 connector, a rugged quick-disconnect plug style widely used on commercial equipment. Can be calibrated for Lithium Ion too. MADE IN THE USA
Why SB120 Matters
The SB120 connector family uses color-keyed, mechanically keyed housings to help prevent cross-mating different circuits/voltages. Always match the SB120 connector color used on your machine.
Common Applications (Where This Charger Is Used)
- Scissor lifts / aerial work platforms: 24V charging for lift battery packs used on many electric slab scissor lift systems.
- Electric pallet jacks: warehouse and delivery operations using 24V packs.
- Floor scrubbers / burnishers: facility maintenance equipment running 24V lead-acid systems.
- Other 24V industrial equipment: any compatible 24V lead-acid battery bank within the charger’s supported range.
Specifications
- Model: QP2425
- Output: 24 Volt DC / 25 Amp
- AC Input: 120VAC (117V), 60Hz
- Typical supported battery capacity range: 150–350 Ah (application dependent)
- Connector: Anderson SB120
- Form factor: portable / benchtop industrial charger
- Size: L 10″ x W 9.5″ x H 8.5″ inches
Fit & Setup Tips
- Match the connector color: SB series housings are keyed by color—verify your equipment’s SB120 color before ordering.
- Confirm battery system voltage: this charger is for 24V systems (typically two 12V batteries in series or a 24V battery pack).
- Lead-acid charging: commonly used with flooded, AGM, and GEL lead-acid packs. If you need lithium settings, ask us to confirm charger programming for your pack.
Need help verifying? Send a photo of your current charger label and the connector (front view showing color + shape). We’ll confirm compatibility before you order.
- Commercial-grade charging: 24V / 25A output for 24V battery systems.
- SB120 connector installed: Anderson SB120 series, color-keyed housing helps prevent mismatched connections.
- Built for industrial equipment: commonly used where rugged portable charging is needed.
- Transformer-based design: heavy-duty construction for dependable performance.
- Wide equipment compatibility: frequently used across scissor lifts, pallet jacks, and floor scrubbers that run on 24V battery packs.
FAQ – QP2425 24V 25A Charger with SB120 Connector
What equipment uses a 24V 25A charger like the QP2425?
Common uses include electric scissor lifts, electric pallet jacks, and floor scrubbers that charge a 24V lead-acid battery system.
What is an SB120 connector?
The Anderson SB120 is a heavy-duty quick-disconnect connector with color-keyed housings designed to help prevent mismatching different circuits/voltages.
Do SB120 connectors come in different colors?
Yes. SB housings are color-keyed. Always match the SB120 color used on your machine to ensure proper mating.
Can this charge AGM or GEL batteries?
Yes—24V industrial chargers like this are commonly used on lead-acid systems including flooded, AGM, and GEL (verify your battery type and required charge profile if your application is sensitive).
How do I confirm this is the right charger?
Confirm 24V system voltage, check your existing charger label for output, and verify the connector is SB120 (and the correct color). If unsure, send photos and we’ll help you confirm.
Industrial chargers are often “close but not correct.” Use this checklist to confirm the QP2425 24V 25A with SB120 is the right match:
- Verify system voltage: Your equipment must be a 24V battery system (often two 12V batteries in series).
- Confirm charge current needs: 25A is a common industrial rate for medium-size 24V packs—especially on pallet jacks, scrubbers, and some lifts.
- Confirm connector type: Make sure your plug is Anderson SB120 (not SB50/SB175).
- Match the SB120 color: SB housings are color-keyed to prevent cross-mating—order the same color your machine uses.
- Check battery chemistry: Most 24V industrial equipment uses lead-acid (flooded/AGM/GEL). If lithium, request verification of charge profile/programming.
- Send photos if unsure: A quick photo of the old charger label + connector usually confirms fit in minutes.
Pro tip: If your equipment “won’t charge,” the issue is often a mismatched connector color/type, incorrect voltage, or a battery pack that’s too low for the charger to start—verify these before replacing parts.
NOTE: If not on shelf, this is a special build and may take 7-10 days for delivery.
Reviews
There are no reviews yet.