NOCO GEN5X2 2-Bank 10A Onboard Battery Charger & Maintainer

Description

2-Bank, 10-Amp On-Board Battery Charger (5-Amp Per Bank), Battery Maintainer, and Battery Desulfator with Temperature Compensation Meet the all-new GEN5X2. Similar to our GENM2, only better. It’s 27% smaller and delivers 43% more power. It’s one of the best performing onboard marine battery chargers we have ever made. A two-bank onboard battery charger rated at 10-amps (5-amps per bank) for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. Independently charge and control each battery bank with selectable charging modes – including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode – for all types of lead-acid and lithium-ion batteries.
• Multiple-banks- A two-bank on-board battery charger rated at 10-amps (5-amps per bank) for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
• Charging modes – Independently charge and control each battery bank with selectable charging modes – including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode – for all types of lead-acid and lithium-ion batteries.
• Enjoy precision charging – An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
• Charge dead batteries – Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
• Restore your battery – Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
• Beyond maintenance – It’s not just a trickle charger, it’s an advanced battery maintainer. A fully-automatic, worry-free battery charger for everyday use – 24/7 – with zero overcharge.
• Redefined mounting – A simplified mounting system allows for quick and easy installations in any direction – even up-side-down – with an integrated anti-vibration backing to isolate shock, vibration, and noise.
• Designed for water – A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater.
• What’s In the Box
GEN5X2 On-Board Battery Charger
(2) Self-Tapping Screws
User Guide & Warranty Information

Specifications

Operating Requirements
Line Voltage: 120V to 240V
AC Frequency: 50Hz to 60Hz
Operating Temperature: -4° to 104° F (-20° to 50° C)
Storage Temperature: -22° to 140° F (-30° to 60° C)
Relative Humidity: 0 to 95% Non-Condensing
Charging Current: 5 Amps DC x 2 Banks
Voltages: 12V
Chemistry: Lead-Acid and Lithium
Types: Wet, Gel, MF, CA, EFB, AGM, Lithium
Battery Capacity Range: Up to 120 Amp-Hours
Maintenance: All Battery Sizes
Power Consumption: 145 Watts (Max), 2 Banks
Protection IP Rating: IP68
Safety Short-Circuit: Yes
Open-Circuit: Yes
Overheating: Yes
Overcharge: Yes
Spark-Proof: Yes
Reverse Polarity: Yes

Size
Height: 5.6 Inches (142.4mm)
Width: 7.0 Inches (177mm)
Depth: 2.2 Inches (56.0mm)
Weight: 4.17 Pounds (1.9kg)

Cord Management
DC Cable + Eyelet Length: 72 Inches (182cm)
DC Cable Size: 16 AWG
DC Fuse Size: 7.5 AMP MINI ® Blade Fuse
AC Cable Length: 72 Inches (182cm)
AC Cable Size: 18 AWG Oil, gas, grease, water, chemical, UV, abrasion resistant

Limited Warranty
3-Year Limited Warranty