Description
AutoMeter BVA-300PR BVA-300 Intelligent Hand-Held Tester/Analyzer Combo with PR-20 Printer
Combo Kit includes BVA-300 Electrical System Analyzer with PR-20 Thermal Printer
The BVA-300 is a Technician grade handheld electrical system tester that preforms a compete electrical system test in less than 82 seconds. Utilizing an on-board 40 amp load, the BVA-300 uses patented Digital Pulse Load technology to fully test most batteries, starters and alternators completely.
– Best of Both Worlds – Accuracy via Patented Resistance & Load Test
– Tests flooded and AGM batteries
– Tests 6 And 12 Volt Batteries
– Tests CCA Range of 100-1600
– Temperature Added For Accuracy
– Fully Automated Load
– Tests discharged battereis
– Easy Input Menus
– Tests starter draw and alternator output
– Stores the last 50 tests in memory
– Reverse polarity protection
– 64 character 4 line LCD screen
– 30″” – 16 gauge leads
– Tough plastic case with easy-grip rubber boot
– Customer communication with optional bolt-on PR-20 printer or PR-12 infrared printer or PC cable
Features
– Tests flooded, deep cycle, and AGM batteries with CCA range of 100-1600 – also detects discharged batteries, bad cells, and has built in reverse polarity protection.
– Unlike competitor models, AutoMeter testers only require a single technician to run a full electrical system test due to our on-board 40 amp True Load cell. This eliminates the need to apply inconsistent loads, such as headlights, fans, etc. which makes our products easier to use and more accurate.
– Automatically stores the last 100 tests in memory.
– 30″ – 16 gauge leads with professional grade clamps that are easily field serviceable.
– Customer communication with optional PR-12 (external printer), PR-20 (bolt-on printer), or AC-12 (PC cable).
– English and Spanish language menus and test results.
– Perfect tool box tester! Rugged engineered composite housing with protective rubber boot for years of service.
– Intuitive menu driven operation, transmitted via back lit LCD screen for ease of use.
– Utilizes advanced Digital Pulse Load (DPL) technology – patented test process and algorithm allowing operators of this product to rapidly measure a battery’s ability to provide adequate cranking power necessary to start the vehicle without the need for time consuming manual electrical system load tests
– Battery test results include: Measured true CCA, voltage and percent of charge, and the battery’s state of health (good, near end of life, or bad).
Specifications
Battery Types: Flooded & AGM Battery
Voltage: 6V & 12V
Battery Range: 100-1600 CCA
Automated Load: 40 Amp
Lead Size: 30” – 16 Gauge
Alternator Test: Yes
Stator Diode Test: Yes
Starter Draw Test: Yes
Voltage Drop Test: None
External Volt Leads: None
Memory: 100 Tests
Operational Temperature: 0-120F
Operational Humidity: 0-85%
Language: English & Spanish
Internal Battery: 9V
Dimensions: 4.5” x 7.1” x 1.4”
Weight: 1.3 lbs
California Residents: Prop 65 WARNING
Warranty: 12 Months
PR-20 Printer Information
The PR-20 is an add-on thermal paper printer for all AutoMeter portable handheld testers. The PR-20 attaches directly to the tester and features a protective boot for long service life.
– Add on thermal paper printer for all AutoMeter portable handheld testers.
– Attaches directly over the tester and is held in place by a rubber protective boot.
– Easy drop in paper replacement – uses standard 58mm thermal paper.
– Runs on a 7.4 V Li-Ion camcorder rechargeable battery (AC-113) (Typical battery life: 6000 print lines – 2 hour recharge time)
– Includes battery charger and battery charges while installed in unit.
Weight: 2 lbs
Warranty: 12 Months
Reviews
There are no reviews yet.