Description
Sure-Lites 26-63 Battery Replacement (6V NiCd) for Emergency Lighting
Sure-Lites 26-63 New replacement 6 V Nicad pack F Cells (CUSTOM-101, BCN7000-5-DWP confirm connector)
- 6 Volt
- Nicad
If your emergency light or exit sign fails a monthly test, won’t stay illuminated during an outage, or the charger indicator shows a battery fault, it’s often time to replace the internal battery pack. This Sure-Lites 26-63 replacement battery is a 6-volt NiCd (nickel-cadmium) pack built for emergency lighting standby performance and reliable discharge when utility power is interrupted.
Common Applications (What This Battery Is Used In)
- Emergency light fixtures (battery backup illumination during power loss)
- Exit signs with internal battery backup
- Commercial safety lighting systems in offices, schools, retail, warehouses, churches, and multi-family buildings
- Sure-Lites / Cooper-style emergency lighting units that specify the 26-63 or equivalent battery pack
Specs (Verify Before Ordering)
- Voltage: 6V
- Chemistry: NiCd (Nickel Cadmium)
- Typical capacity: commonly listed around 7.0Ah–8.5Ah depending on pack build
- Typical dimensions: approximately 6.35″ (L) x 1.27″ (W) x 3.51″ (H) (may vary slightly)
- Connection: wire leads with connector (match your existing plug style)
Known Cross-Reference / Replacement For
Commonly cross-referenced as a replacement for the following battery models (match your pack):
- Sure-Lites: 26-63 (also referenced as T26000063 in some listings)
- Dual-Lite: 12-802
- Emergi-Lite: 002006 / 002208 (also shown as 2006 / 2208)
- Gates: 41B042AF02401
- Interstate: NIC1356
- Lithonia / Prescolite: ENB0607 (Prescolite: E8208-11-00 Rev P)
- Teig: 24-4005 / T026-63
How to Confirm Compatibility
- Match voltage: your old battery must read 6V on the label.
- Match chemistry: confirm it is NiCd (not NiMH or SLA/AGM).
- Measure the pack: compare length/width/height to ensure it fits the housing.
- Match the connector: plug style must match (or provide clear photos for verification).
- After installation: allow charging time, then run a test per your fixture’s instructions.
Battery Care & Disposal
- NiCd batteries must be recycled according to local regulations. Do not dispose in household trash.
- If your unit still fails a test after battery replacement, the charger board, lamp heads, or wiring may need inspection.
Need Help Matching the Connector?
Send a photo of your existing battery label and connector (plus a quick measurement), and we can help confirm the correct configuration before you order.
- OEM-style replacement for Sure-Lites 26-63 emergency lighting battery packs
- Rechargeable NiCd chemistry designed for emergency standby applications
- 6V configuration commonly built using F-cell NiCd cells (pack style varies)
- Connector-ready (match your plug/lead style before ordering)
- Trusted use case: emergency fixtures and exit signs in commercial & residential buildings
- Installation tip: verify polarity and wire routing; test emergency mode after install
If your emergency light or exit sign fails a monthly test, won’t stay illuminated during an outage, or the charger indicator shows a battery fault, it’s often time to replace the internal battery pack. This Sure-Lites 26-63 replacement battery is a 6-volt NiCd (nickel-cadmium) pack built for emergency lighting standby performance and reliable discharge when utility power is interrupted.
Common Applications (What This Battery Is Used In)
- Emergency light fixtures (battery backup illumination during power loss)
- Exit signs with internal battery backup
- Commercial safety lighting systems in offices, schools, retail, warehouses, churches, and multi-family buildings
- Sure-Lites / Cooper-style emergency lighting units that specify the 26-63 or equivalent battery pack
Specs (Verify Before Ordering)
- Voltage: 6V
- Chemistry: NiCd (Nickel Cadmium)
- Typical capacity: commonly listed around 7.0Ah–8.5Ah depending on pack build
- Typical dimensions: approximately 6.35″ (L) x 1.27″ (W) x 3.51″ (H) (may vary slightly)
- Connection: wire leads with connector (match your existing plug style)
Known Cross-Reference / Replacement For
Commonly cross-referenced as a replacement for the following battery models (match your pack):
- Sure-Lites: 26-63 (also referenced as T26000063 in some listings)
- Dual-Lite: 12-802
- Emergi-Lite: 002006 / 002208 (also shown as 2006 / 2208)
- Gates: 41B042AF02401
- Interstate: NIC1356
- Lithonia / Prescolite: ENB0607 (Prescolite: E8208-11-00 Rev P)
- Teig: 24-4005 / T026-63
How to Confirm Compatibility
- Match voltage: your old battery must read 6V on the label.
- Match chemistry: confirm it is NiCd (not NiMH or SLA/AGM).
- Measure the pack: compare length/width/height to ensure it fits the housing.
- Match the connector: plug style must match (or provide clear photos for verification).
- After installation: allow charging time, then run a test per your fixture’s instructions.
Battery Care & Disposal
- NiCd batteries must be recycled according to local regulations. Do not dispose in household trash.
- If your unit still fails a test after battery replacement, the charger board, lamp heads, or wiring may need inspection.
Need Help Matching the Connector?
Send a photo of your existing battery label and connector (plus a quick measurement), and we can help confirm the correct configuration before you order.
Reviews
There are no reviews yet.