Description
BSL20HV Bodine Emergency LED Driver — 14.4 V Ni-Cd Battery Replacement
This 14.4 V Nickel-Cadmium (Ni-Cd) replacement pack is engineered for Bodine BSL20HV emergency LED driver systems. As an OEM-equivalent 12-cell series pack, it restores dependable emergency illumination and recharges quickly to keep your life-safety lighting compliant.
This Tran-Bal 40000030 Battery Replacement Pack is 14.4 Volt pack also can replace the Tran-Bal models: GP450DKTB12SMX GP450DKTB125MX GP450DKT8125MX GP450DKT812SMX 12KRDH 420994-000. BCN5500-12BWP-CE8981-3Pin3Wire, Custom-568, BGN5500-12BWP-1898EC-3 PIN
Key Features
- Direct replacement fit for driver housingsBSL20HV (verify part label and connector).
- Matched Ni-Cd cells for stable voltage, long cycle life, and temperature tolerance.
- Industrial assembly — spot-welded tabs, insulated wrap, and strain-relieved leads.
- Fresh inventory to maximize service life and maintain rated e-light runtime.
Common Applications
- Emergency LED drivers in troffers, strips, and retrofit kits using Bodine BSL20HV
- Commercial/industrial emergency lighting where a 14.4 V Ni-Cd pack is specified
Specifications
| OEM / Reference | Bodine BSL20HV (battery replacement) |
|---|---|
| Nominal Voltage | 14.4 V DC |
| Configuration | 12S (12 × 1.2 V Ni-Cd cells in series) |
| Capacity (typical) | 5500 mah long run time |
| Chemistry | Nickel-Cadmium (Ni-Cd), rechargeable |
| Pack Style | Inline “stick” or segmented pack depending on fixture cavity |
| Terminations | Pre-wired leads / OEM connector (JST/Molex styles common) — 3 Pin 3 Wire |
| Operating Temp | Approx. −20 °C to +50 °C (device dependent) |
| Compliance | Non-spillable; suitable for routine 30/90-minute code testing |
Fit & Verification
To ensure a perfect fit, confirm the following from your driver label or old battery pack:
- Driver model: BSL20HV
- Voltage: 14.4 V Ni-Cd
- Connector series/pin count and polarity
- Pack length/diameter or block dimensions to clear the housing
- Capacity (mAh) required by your maintenance plan
What’s Included
- (1) 14.4 V Ni-Cd battery pack replacing Bodine BSL20HV battery 3 Pin 3 Wire connector
Installation & Maintenance
- Turn off AC power and follow lock-out/tag-out procedures.
- Note connector orientation and routing; remove the old pack.
- Install the new pack; secure wiring and strain relief, then restore AC.
- Allow a full recharge (typically 24 hours) and run a 90-minute test.
Service tip: Record install date and next test in your emergency-lighting log to streamline inspections.
Shipping & Availability
Ships quickly from U.S. warehouses. Bulk and contractor pricing available for facility rollouts.
Tran-Bal 40000030 Battery Replacement
Our new 14.4 Volt replacement battery is $69.99 for the Tran-Bal 40000030 Battery 3 Wire 3 Pin Connector
- 14.4 Volt
- Nicad Rechargeable
- 5500 Mah
This 14.4 Volt pack also can replace the Tran-Bal models: GP450DKTB12SMX GP450DKTB125MX GP450DKT8125MX GP450DKT812SMX 12KRDH 420994-000. BCN5500-12BWP-CE8981-3Pin3Wire, Custom-568, BGN5500-12BWP-1898EC-3 PIN
Reviews
There are no reviews yet.